have an 84 toyota rear axle complete with bad breaks and a 4.10 diff- $150
have an 84 rear axle housing wiht a 4.10 diff and leaf springs but no shafts- $125
i have a bare solid front axle housing and i can through in a custom made truss- $100
have one or two 4.10 diffs kickin around- 30 each
have a tranny and tcase for 22r idk what one it is- 75 bucks
have to starters for 22r/re- 15 each
have 2 alternators- 15 each
have 2 yota brake boosters- 20 each
have a 1st gen yota dash no cluste o n e thing- $10
have a smitty built type of rear bumper came off a toyota but needs new mounts welded on- $40
have a grizzly name brand chrome roll bar looked them up and they are pretty exspensive- 75
have a rebco box off a toyota extended cab short box needs a floor welded in- 200
have 4 matching steel wheels 6 bolt toyota could use some paint- 100
have an 84 toyota pickup gas tank- $30
have an 83 1st gen drivers side door in ok shape- $45
have some drive shaft parts let me know what u need.
also forgot to mention i have a v6 3.0 L tranny and tcase would like 200 bought it for 250
might have other things u need let me know.
Happen to have a tranny crossmember? See my thread here: http://www.vioffroad.com/forum/wanted/wanted-toyota-transmission-crossme...
you dont happen to have a igniter for a 88 and before 3l? its a box that sits above the ignition coil? let me know. cheers.
What are the specs on those steelies? Size backspacing etc
i need a diff, v6 4.10 is prefeable as it will be behind my jeep 6cyl
Still have leafs ?
Hi. I'm looking for a solid front axle from an older pickup (55" width). Is the front axle you have 4wd and 55"? I'm interested in the rims if they are the right width and backspacing. Maybe the tranny/t-case from the 22r.